2.5L Light Ochre Country Colour 2203
Osmo Country Colour is highly recommended for all woods in the exterior where exceptional durability is asked for: timber cladding, balconies, windows, and window shutters, gates, pergolas, wooden panels, garden furniture, and summer houses, carports, etc. Ideal for renewing previously treated, weathered wood surfaces or old micorporous coatings.
Opaque, at first slightly satin-gloss then satin finish
natural oil based for wood in outdoor areas.
Wood tone and grain is covered. The wood structure remains noticeable.
Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, ex- tremely weatherproof and UV stable surface does not crack, peel, flake or blister.
No sanding necessary, just simply recoat; no primer is needed. Easy and seamless application. Finish stays workable while coating.
The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3).
Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and summer houses, carports etc. Ideal for renewing old microporous finishes and weath- ered wooden surfaces.
26 m2/ 1l
Based on natural plant oils (sunflower oil, soya oil and thistle oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free). EU limit value for this product (cat. A/e): 400 g/l VOC (2010). This product contains max. 400 g/l VOC.
Detailed declaration of ingredients available upon re- quest.
Specific gravity: 1.0-1.35 g/cm3
Viscosity: 20-60s DIN EN ISO 2431/4 mm, viscid Odour: faint/mild, after drying odourless
Flash point: >60°C acc. DIN EN ISO 2719
Up to 5 years and longer if can is kept dry and closed
tightly. If thickened by frost, store for 24-36 hours at room temperature before use. SURFACE PREPARATION
Wood surface must be clean, dry and frost-free (mois-
ture content max. 20%).
Osmo Country Colour is ready to use. Do not thin. Stir well before use.
If possible, please apply the first coat to all sides be- fore installation.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.
As a general rule, wear a dust mask during sanding works.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
If additional protection against blue stain, rot and in- sects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
METHODS OF APPLICATION
With Osmo Flat Brush or Osmo Microfibre Roller, apply
thinly and evenly to the clean and dry wood along the wood grain and spread well.
Allow to dry for approx. 10-12 hours under good ven- tilation.
After drying, apply a second coat – also thinly.
For renovation works, one coat applied to the clean and dry surface is usually sufficient.
CLEANING OF TOOLS
With Osmo Brush Cleaner (free of aromatic com- pounds).
Approx. 10-12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.
1 litre covers approx. 26 m2 with one coat.
Coverage depends significantly on the condition of the wood. All information refers to smooth and planed/ sanded surfaces. Other surfaces may lead to differ- ences in coverage.
If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900.
Country Colour, which has been trusted for over de- cades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives.
Many wood species contain water-soluble coloured extractives which may leach out naturally when weath- ered.
Keep out of reach of children. Do not get in eyes, on skin, or on clothing. If medical advice is needed, have product container or label at hand. Use only outdoors or in a well-ventilated area. Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of self-ignition). The dried finish is classified as B2 (nor- mal flammability) according to DIN 4102 regulations. Safety data sheet available on request.
Dispose of leftover product and completely emptied packaging according to local official guidelines (waste code number 08 01 11). Only completely emptied cans can be recycled.
COLOUR TONES 2101 White
2203 Light Ochre 2204 Ivory
2205 Sunflower Yellow 2308 Nordic Red 2310 Cedar/Redwood 2311 Signal Red
2404 Fir Green
2501 Labrador Blue 2506 Royal Blue 2507 Dove Blue 2606 Medium Brown 2607 Dark Brown 2703 Charcoal
2704 Dusk Grey 2708 Pebble Grey 2716 Anthracite Grey 2735 Light Grey 2742 Traffic Grey
0.75 L; 2.50 L; 25 L
The above mentioned information is provided to the best of our knowledge however without any liability.
|Dimensions||17 × 17 × 17 cm|